Photoluminescent Vinyl Roll (LLL)

Photoluminescent Vinyl Roll is used as low location lighting systems comply with IMO Resolution A.752(18), products like IMO signs, photoluminescent tapes, fire equipment location marking…

  1. Comply with IMO Res.A.752(18) or ISO 15370
  2. Flame retardant material with water-proof
  3. Maximum after-glow luminescent time up to 5000 mins
  4. MED approved

Made from fire retardant polyvinylchloride (PVC) and photoluminescent (PL) media material with self adhesive vinyl, and used for maritime safety, particularly in Low Location Lighting (LLL) systems, must comply with strict SOLAS (Safety of Life at Sea) regulations, primarily governed by IMO Resolution A.752(18) and ISO 15370.

Description

Comply with:

  1. SOLAS 74 Reg. II-2/13
  2. IMO Res. A.752(18), IMO Res. MSC.98(73)-(FSS Code) 11
  3. IMO Resolution MSC 307(88) (2010 FTP Code)

Tests Carried Out:

The tests for Low-location lighting systems (components only) comply with ISO 15370:2021 incl. ISO 15370:2021 /A1:2023.

Application:

  • Approved for use as low-location lighting system, escape route signs and fire equipment location marking.
  • Extent of arrangement, placing, width and luminance of the photoluminescent strips based on the ambient light are to be in accordance with IMO Res.A.752(18) or ISO 15370:2021 and is to be approved by the administration or competent authority in each case/project.
  • Photoluminescent strips having a width less than 75 mm shall only be used if the luminance is increased to compensate for the reduced width in accordance with Ch. 7.1 of IMO Res. A.752 (18) or Ch. 4.2.2 & Annex D of ISO 15370:2021.
  • Each product is to be supplied with its manual for installation, use and maintenance.

Photoluminescent Vinyl Roll Specification:

Model PL-050 PL-100 PL-150 PL-300 PL-500
Fire Retardant Not Yes Yes Yes Yes
Glow time >4 hours >6 hours >8 hours >10 hours >12 hours
After-glow Intensity (10mins) >70mcd/m² >100mcd/m² >150mcd/m² >300mcd/m² >500mcd/m²
After-glow Intensity (60mins) >10mcd/m² >14mcd/m² >20mcd/m² >35mcd/m² >68mcd/m²
After-glow Luminescent Time >1000 min >1400 min >1800 min >4000 min >5000 min
Thickness Exclude Paper 0.28mm 0.29mm 0.32mm 0.42mm 0.66mm
Thickness Include Paper 0.40mm 0.41mm 0.43mm 0.53mm 0.78mm
Roll Size 1.24×45.7m 1.24×45.7m 1.24×45.7m 1.24×45.7m 1.0×50.0m
Color Light Yellow (Daylight), Yellow Green (Glow in the dark)
Material PVC+PL
Surface Finish Glossy, Matte, Anti-Slip
Temp. Resistance -20 ~ +65 ℃
Adhesiveness >1.2 kgf/25mm (After 24 hours, 180° Adhesion)
Imaging Method Silk Screen, Inkjet Printing
Lifespan 4~6 years (outdoor), 6~8 years (indoor)
Approval QC MED MED MED MED

Note:

  1. Test Standard: DIN 67510-part 1, D65 Standard light source after being excited for 5 min by 1000 LUX.
  2. After-glow time refers to the time required for the luminosity to decay to 0.32mcd/sqm.